LMG-F Light Machine Gun7.62x39mm with Folding Butt

The light machine gun 7.62×39 mm LMG belongs to the firearms whose action is based on the principle of conveying a part of the powder gases through a special port in the wall of the stationary barrel and their influence onto the bolt carrier.

The weapon is characterized by milled receiver made according to the method of hot die forging.

The barrel chamber is closed by turn of the bolt and engaging the firing stops in the receiver. The weapon is fed from a 40 round arcuated staggered black polymer magazine. The sight consists of sector marked for shooting at a distance of up to 1000m.Bullet killing effect for manpower is preserved over a range of 1500 m.

The hammer-trigger mechanism has a hammer, which is activated by firing spring. The mechanism has a safety device-safety for setting from single to automatic fire mode as well as contrariwise.

The safety simultaneously serves as well as a safety lever preventing the accidental shoots. It is located on the right hand side of the receiver and is formed as a long pivoted lever.

When set in the utmost upper position the trigger is blocked.

In this position the safety serves two other functions: prevents contaminating of the receiver through the bolt carrier handle slot in the receiver cover prevents from reloading the barrel chamber

Optional Extras: luminous spot on the sights; 20/30-round translucent magazine; front sight adjusting kit (in the ratio 1:10); set for magazines coupling; blank fire attachment; rail for sighting devices


4.8kg – Weight of Weapon
0.93kg – Weight of Loaded Magazine
590mm – Barrel Length
805mm – in travelling position Overall Length
750m/s – Muzzle Velocity
600rounds/min – Fire Rate
50rounds/min – single Practical Fire Rate
1500 m – Max Effective Fire Range
20,000rounds – System Life
1000 m – Sighting Range


Selective Fire (semi- and full automatic) fire mode

7.62x39mm caliber

40rounds capacity

gas operated Function

yes folding butt

Complete Set Sling Cleaning Rod Box with accessories including: /brush, drift, scourer, screwdriver/ 2pcs. Bags for 4 magazines oil can 8pcs. Magazines for 30 cartridges Spare part kit including: Ejector, Ejector’s spring, firing pin, bag for spare parts


6pcs – in Wooden Case
84kg – weight of each Wooden Case
0.309cm3 – volume of each Wooden Case
1190x650x400mm – dimensions of each Wooden Case