MG-1MS Machine Gun7.62x54R on Support

The 7,62×51 mm Machine Gun MG-1MS is designed and intended to be used in the countries in the Middle East, South-East Asia and Africa with tropic and desert conditions.

The Machine Guns operates in automatic fire mode.

In general, the 7.62 mm MG-1MS preserves all technical characteristics of PKS and PKMS, but the results of the endurance test show that the System life and the barrel life of MG-1MS are increased in about 30% in comparison with PKMS, which is a result of some changes of the mechanisms and the increased cooling surface of the barrel.

The barrel is manufactured by the method of cold radial forging that resulted in bigger hardness and better structure of the material.

The barrel bore is chromium plated. The other differences are: the new design of the flash suppressor-compensator; butt and hand guard made of high quality and resistant glass fiber reinforced polycaproamide, not effected after heating by direct sun lights, corrosion and humidity resistance, light and firm.

It fires 7.62×51 mm with ordinary bullets (light bullet mod. 1908, heavy bullet mod. 1930), armour – piercing incendiary and tracer bullets. A 200 round link metal belt, held in a metal box feed cartridges in. As support a tripod is provided to achieve more precision and efficiency of fire at air and ground targets.

Optional Extras: Blank fire attachments -set, to be ordered separately; Rail for sighting devices.


8.8kg – Weight of Weapon
6.9kg – loaded ammunition box with belt of 200 Weight of Loaded Ammunition Box
4.5kg – Weight of Tripod
605mm – Barrel Length
1160mm – Overall Length
825m/s – Muzzle Velocity
650rounds/min – Fire Rate
250rounds/min – Practical Fire Rate
3800m – Max Fire Range
1000m – Max Effective Fire Range
28000rounds – System Life
1500m – Sighting Range


Full Automatic fire mode

7.62x54r mm caliber

200rounds Box Capacity

gas operated Function

Complete Set: Second Barrel Bag with spare parts consisting of: /Firing pin, ejector, ejector’s spring, ejector’s axle, pin of ejector’s axle/ box with accessories extracting device for split cartridge cases cleaning rod sling 4pcs. Metal belt for 200 cartridges;


1pcs – in Wooden Case
53kg – weight of each Wooden Case
0.244cm3 – volume of each Wooden Case
1330x525x350mm – dimensions of each Wooden Case